Madri Custom Leather Work, Leather Products, Custom Leather Work, Leather Accessories, Leather Cowboy Products

HOME | CUSTOM LEATHER WORK PORTFOLIO | ABOUT US | CONTACT US

Quigley Belts:

Sharps rifle cartridge belts designed after the cartridge belt worn by Matthew Quigley in the movie “Quigley Down Under”
The outer belt, belt lining and loop strip are made with Hermann Oak leather tanned in St. Louis, Mo. USA
The loop strip is 1 ¼ inch wide and laced through the outer belt leather
The belts are custom made to carry the 45-70, 45-90, 45-110, 45-120 and 50 caliber cartridges
Brass or copper rivets with burrs are used in belt construction
Chicago screws ( nickel or brass ) are used to secure the buckle chape so that buckles can be changed out
Belt edges are edged, sanded, dyed, burnished and finished with a clear sealer
Belt edges are stitched with heavy thread ( white, straw, chestnut, black )

Quigley Belts can be customized with:

various type and size buckles
brass or nickel spot designs and rosettes
real Mexican coin conchos, Texas star conchos, repro silver dollar conchos and others
custom stamping, carving, lettering, personal initials or brand
Buckstitching along the belt edge
different color dyes or left natural in color with an oil finish using Montana Pitch Blend Leather Oil and Conditioner
spacing provided for a holster and/or a knife

Careful measurements must be provided when ordering. Using a soft tape measure, place the tape around your waist, where the belt will be worn, while wearing all the clothing and equipment, such as pants belt, chaps belt, etc, that the Quigley belt will normally be worn over. This measurement will provide the length from the tip of the buckle tongue to the center hole on the belt billet. Two additional holes will be provided on each side of the center hole for belt adjustment. Holes will be space one inch apart.

Custom requests are welcome.

Click here to see more samples of my work.
Please email me your questions.

(For a more detailed photo, please click on the thumbnail photos below.)

1. 45-120 cartridge, 4 ½ in wide belt, lined, 1 ¼ in wide laced cartridge loops, one hole in each cartridge loop, carved initial plate, border stamped, 1 ½ in Mexican Cinco Peso coin screwback conchos, Cody clipped corner buckle, dyed dark tan and oiled

1a.

1b.

1c.

1d.

1e.

1f.

1g.

1h.

2. 45-70 cartridge, 3 ¼ in wide belt, lined, 1 ¼ in wide laced cartridge loops, 1 ½ in Texas Star screwback conchos, Cody Clipped Corner buckle, oil finish

2a.

2b.

2c.

2d.

2e.

2f.

2g.

3. 45-110 cartridge. 4 inch wide belt. Lined. 1 1/4inch wide laced cartridge loops with hole in each loop.

3a.

3b.

3c.

3d.

3e.

3f.

3g.

4. 45-110 cartridge. 4 inch wide belt. Lined. 1 ¼ inch wide laced cartridge loops with hole in each loop.

4a.

4b.

4c.

4d.

4e.

4f.

4g.

4h.

4i.

5. 45-70 cartridge, 3 ¼ in wide belt, lined, 1 ¼ in wide laced cartridge loops, 1 ½ in Texas Star screwback conchos, Cody Clipped Corner buckle, oil finish, stitched leather circle with lettering, Custom shaped after a Bronc Belt.

5a.

5b.

5c.

5d.

5e.

5f.

5g.

5h.

5i.

5j.

6. 45-70 cartridge, 3 ¼ in wide belt, lined, 1 ¼ in wide laced cartridge loops, Mexican Cinco Peso coin screwback conchos, Cody Clipped Corner buckle, oil finish.

6a.

6b.

6c.

6d.

6e.

6f.

6g.